5 Useful Xbox Series X Accessories You Can 3D Print

A 3D printer is very useful, especially if you have a video game console like the Xbox Series X at home and want to print accessories for it. Several online project options allow you to print accessories instead of purchasing them, providing simple ways to organize your setup or more elaborate builds.

Many of these projects are relatively accessible and simple to complete, especially for anyone learning how to use one of these machines. Some 3D printing projects aimed at gamers focus on this, solving problems in simple ways. You can find all kinds of controller stands, cable organizers, and other small improvements to keep your space organized.

Xbox Series X also has a large community of creators who develop printable accessories specifically for the console and its controllers. Some projects require little beyond filament and a few hours of printing, while others involve multiple parts and more assembly. For this reason, we have separated five projects that you can do yourself for your console.

Anyone who owns multiple Xbox controllers has probably noticed how much space they take up on a desk or in a drawer. For this reason, the Xbox Controller Dual Stand offers a simple solution: it allows you to store two controllers vertically in the same space. This is one of the most useful 3D printing projects for office organization, mainly because it reduces clutter without taking up a lot of extra space.

The stand was designed to fit the Xbox Series X controller, so you may have difficulty using this stand for third-party controllers or other consoles. Additionally, if you use a larger battery, the creator points out that the fit may not work properly. This is why it is important to keep an eye on all measurements before purchasing. Some users report good results printing it in PLA, but the creator hasn’t included any required specifications, so you can use whatever filament you prefer.

For anyone who wants to better use Remote Play, a feature that lets you stream games installed on your Xbox Series The Xbox Controller Battery Cover Phone Holder was designed for this purpose, attaching the phone directly to the gamepad and leaving the screen above the buttons.

Although not made for the Series X itself, the project represents an interesting way to better use the Xbox Series X with Remote Play. Instead of putting the smartphone on a table, another surface, or purchasing a specific accessory, you can continue to use your Xbox controller. The console broadcasts the image, while the phone acts as a screen and the gamepad remains available to play.

This model uses the battery cover area as an attachment point and also offers versions compatible with the Xbox One controller. However, you’re not printing it in one piece, so you’ll need to assemble it to get the full result.

Depending on how many games you want on your console, the Xbox Series X’s internal storage may not be enough. Fortunately, you have options, but using one can leave the drive free next to the console with the USB cable. For this reason, one of the best projects is to print media for this external hard drive. This helps you organize your space while keeping the unit close to the console.

Different hard drive models require different versions, so check the specific measurements of your storage device carefully before printing; otherwise, it might not be secure. This print is a great example of a 3D printing project that helps you organize your technology, all without investing in a dedicated hard drive enclosure. This support also reduces the risk of the cable pulling on your drive or having it thrown to the ground during movement. Since it is primarily used for organization, PLA also works well.

If you store your Xbox Series To protect it, you can print an Xbox Controller Stick Protector, a simple piece designed for this purpose. It fits the poles and keeps them centered, preventing them from getting stuck or dug in and potentially preventing future problems.

Since the accessory must flex slightly to fit or detach from the controller, the model’s creator recommends using more flexible materials, like TPU, instead of stiffer plastics. This also prevents the part from leaving marks, pressing too hard on the analog sticks, or breaking over time. This same model can also work with older Xbox controllers with a few adjustments, but it’s a simple project and very easy to print.

If you like racing games, like “Forza Horizon 6”, you should know that controlling a car using a controller is not one of the easiest experiences. A dedicated wheel can greatly improve accuracy, but it is usually expensive and takes up a lot of space. For this reason, a great alternative among the coolest Xbox gadgets is to print a stand that turns your controller into a steering wheel.

The Xbox Series The project lets you adjust the steering resistance with springs and includes a bracket to attach it to a desk. According to the creator, it is compatible with several controllers, including Xbox’s premium controller, the Elite Series 2.

However, this is a more elaborate project and requires more materials. The creator recommends PLA, layers between 0.16 and 0.2 mm, and around 25-30% infill. The entire print can consume around 800-900 grams of filament.

We looked at popular 3D printing repositories to find projects for the Xbox Series X, its controllers, or features commonly used with the console. We focused on designs with a practical use case, like organization, storage, protection, and enhanced gameplay, rather than cosmetic modifications or decorative prints.

We also looked at how accessible each project would be on a typical consumer 3D printer. This meant looking at compatibility notes, recommended materials, print settings, and creator or user feedback when available. We wanted variety, which is why the final selection includes both simple and more ambitious projects. We also avoided accessories that might interfere with console ventilation or add unnecessary risks during normal use.